Hiding Speaker Wires: How To Hide Speaker Wire Like A Pro!

Having visible wires or audio cords can be bothersome and contribute to a cluttered appearance of the area. However, there are several methods you can use to hide your speaker wires or audio cables. Concealing them under the carpet, behind baseboards, under the floor, or in the drywall are available options.

If you have any electronic devices in your living room or any other part of your house, you likely have cords and cables lying around. Having wires hanging from the ceiling or walls can detract from the room's overall aesthetic and even pose a safety hazard if someone trips over them.

To help you tackle this issue, this article will provide tips on how to conceal your speaker wires or audio cables so that you can avoid the annoyance of seeing them while cleaning.

Easy Ways To Hide Speaker Wire

Cover With Rugs

Rugs or runners may be the best method to keep the wires from being unsightly if they run through the floor.

These floor coverings frequently provide your space with a dash of unusual glitz. Moreover, the rugs guard against unintentional falls. After all, individuals who are unintentionally caught in the wires frequently fall.

You can utilize runners, floor coverings, or rugs that complement the decor of your room. It is a straightforward concept that doesn't require installation or special equipment. Simply purchase a rug and arrange it where it belongs.

To make cleaning your hardwood floors easier, it is preferable to utilize rug pads that are the same size but made of different materials.

Alternatively, you can install under-rug cables with cord covers for additional stability in the areas with the most foot traffic.

Camouflage with Paint

Several businesses manufacture long cable conduits, ducts, and raceways, and they are put along baseboards or corners where walls meet to conceal cables in hollow structures. You may paint them to match the color of the wall and even run them up the middle of a wall to create surround speakers.

Use Cable Organizer

Cable organizers are designed solely for organizing cables, not for cable concealment. The standard method of arranging cables is to roll and tie them simply. By doing this, the cables are kept from crossing the floors and endangering the individuals living in the home.

Tuck Between Baseboards and Carpets

The baseboards and rugs can be used to conceal wiring. Baseboards, particularly tack strips, frequently have a hollow hole during installation. The speakers can be hidden in that gap between the tack strips and the walls.

To access the junction of the rug and baseboard, you must first cut the paint seal with a knife or razor.

You must now remove the baseboard moldings to create room for the cables. When installing wires, experts advise starting at the beginning and working your way to the conclusion. You must take precautions to prevent damaging the paint.

Using your fingertips, you can quickly tuck the wires. The wires can be inserted within the space using a screwdriver if it is smaller.

Try to estimate the area needed to fit the cables before using baseboards if you intend to install them. Alternatively, using wire channels, you can elegantly pass the cables below the baseboard.

It fits perfectly once the wires have been properly stowed. Push the carpet edge back against the tack strip once more. You might need to reapply the molding to hide everything and cover the edges.

This is the easiest technique to conceal the speaker wires without causing any noticeable alterations.

Hide Alongside Light Strips

You may conceal light strips in your room by running speaker wires over them in your room.

Use Flat Adhesive Speaker Wire

Many individuals use the conventional 18-gauge or 16-gauge speaker wire when creating a custom installation. Nevertheless, a flat, sticky wire can also be used in its place. This kind of wire is intended for use inside walls and not to be seen from the outside. You won't need to drill any holes or install electrical outlets to utilize it. 

Use Speaker Tape

Speaker wire tape is comparable to cable concealer, except it is significantly less expensive. Most of the wire can be painted over, and the tape makes it simple to attach to the wall. As a result, the tape might fade into the wall and become less obvious.

Although this is an excellent alternative because it is adhesive, likely, removing the tape will also remove the wall's current paint. Although this isn't a major problem, it's something to be aware of, especially if you rent your home.

Hide Inside the Walls and Ceilings

You can run speakers and other cables inside the room's walls for the ultimate cable invisibility. Even wall panels with terminals for multiple connections can be mounted close to speakers and other equipment. As this needs the most labor, engaging a professional installer is usually advisable unless you're a dedicated do-it-yourselfer.

Chair Rail Molding

Speaker wires can be hidden using chair-rail molding, which is placed horizontally on walls around mid-height. Orac Decor provides a selection of what it refers to as hollow channel panel molding styles.

Go Wireless

If you can go wireless, this is an excellent technique to hide speaker wires because no wires are required! Keyboards, mouse, speakers, and similar equipment can all be used for this. Just use Bluetooth or WiFi capable so that your computer or another device may transfer signals without having to be hooked in all the time, like when using an HDMI or optical connection.

FAQs

Does The Speaker Wire Need To Be Covered?

Yes, the speaker wire should be covered and insulated properly to avoid oxidation since copper is a widely used material in speaker wires because it is economically feasible and exhibits low resistance.

Do Speaker Wires Carry Electricity?

The main function of the speaker wire or speaker cable is to transmit low-voltage electrical current from the power amplifier to the speaker.

What Is The Maximum Distance For The Speaker Wire?

The maximum length that the speaker wire can be run is unknown.

According to consensus, regardless of the cable's thickness, distances longer than 50 feet may produce detectable sound quality disparities.

Conclusion

Cable wires are unattractive and sometimes dangerous. The best choice is wireless, although it can be very pricey. Our specialists recommend the following methods for concealing speaker wire. 

It involves using light strips, duct raceways, wire tapes, and moldings. Also, they are tried-and-true solutions for removing obtrusive cable lines from your audio system.